For those of you interested in making your very own tie-dyed Disney shirts, I documented the steps yesterday when I made some more, and will post the steps in pieces. If you miss a step, just go to my profile page and read from the bottom up. Step 4 - the FLip side, completing the dye process and adding the Disney magic. Once you have added your colors on one side of the shirts, turn the shirts over and repeat the steps. Note: you may want to have some paper towels handy at this point, to mop up the dye on your work station after you pick your shirt up, before placing it back down on its dyed side. When the shirts are fully covered in dye on both sides, wrap the shirts in plastic wrap or put them in freezer bags to let the dye set on your workstation overnight. The longer they set, the more vivid the colors. I have waited 6-8 hours and also overnight. It really does make a difference the longer they set. Once you have let your shirts set the desired time, remove the shirts from the plastic over your sink, and remove the bands. Run cool water over the shirts to remove the excess dye, until the water runs clean. Put the shirts in the washing machine and wash/dry them as you would with your normal colored laundry (I wash them by themselves according to their color if I am making different colored shirts). When the shirts are dry, you can wear them as is, or paint a Disney design on them. To paint, lay the shirt out on a table, add a piece of cardboard in between the layers, and paint anything you like using different colors of fabric paint and paint brush. My favorites are the Mickey silhouettes with black paint - just choose an image everyone will recognize, and I'm sure it'll turn out great! You can use anything to transfer the images. I normally just print the images from my computer on paper, cut them out and trace the image with a fabric or permanent marker. Good luck... let me know if you have any questions!!